ABB IRT 710 Product Manual page 330

5 Repair
5.4.2.6 Replacing the cables in cable chain
Continued
6
7
8
9
Refitting the movable chain end
1
Continues on next page
330
Action
Insert the cable connector back through the cable
drawer.
Route the cable and ensure that the cable is made
as flat as possible without cables piling up.
Refit the plastic link bars.
Reconnect the connector on the outer side if re-
moved.
Action
Note
If any part of the cable chain tray has been re-
moved, use Loctite 243 when refitting parts. Also
note that the NYLOC nuts can only be used once.
© Copyright 2023 ABB. All rights reserved.
Note
xx2200000891
xx2200000890
Note
Product manual - IRT 710
3HKA00000186299-001 Revision: B