ABB IRT 710 Product Manual page 278

5 Repair
5.3.4 Replacing the mechanical stops
Continued
2
3
Concluding procedure
1
278
Action
Refit the mechanical stop and secure with
the screws.
If the external cable chain bracket is discon-
nected, secure the external cable chain
bracket to the bumper kit with screws.
Action
DANGER
Make sure all safety requirements are met when
performing the first test run. See
may cause injury or damage on page
© Copyright 2023 ABB. All rights reserved.
Note
xx2200000837
Screws: ISO 4762 M20x50 Class12.9 (4
pcs)
Washers: BN 792 M20 Washer (4 pcs)
Tightening torque: 305 Nm ±3%
xx2200000843
Screws: ISO 4762 M8x30 Class 12.9 (2 pcs)
Washers: BN 792 M8 Washer (4 pcs)
Tightening torque: 43 Nm
Note
First test run
29.
3HKA00000186299-001 Revision: B
Product manual - IRT 710