Changes; Overview; Rev. A; Rev. B - Rockwell Automation MagneMotion MagneMover LITE Original Instructions Manual

Changes

Overview

This manual is changed as required to keep it accurate and up-to-date to provide the most
complete documentation possible for the MagneMover
provides a brief description of each significant change.
NOTE: Distribution of this manual and all addenda and attachments is not controlled. To
identify the current revision, see the
website.

Rev. A

Initial release.

Rev. B

Added the following:
• Added this Changes section.
• In Chapter 2, Safety
to show current labeling. Added a figure that shows
™
LITE
• Added
added power wiring. Added guidelines for
and added
• In Chapter 4, Specifications and Site
the switches, motor bracket, tandem puck, node controllers, and power supply. Added
electrical connection and indicator
supply. Added power and communication cable information.
• In Chapter 5,
bracket and for
nection
Provided additional information on
including PoE.
MagneMover LITE User Manual
Guidelines, added
transport system.
Chapter 3, Design Guidelines, moved the
puck loading information.
Installation, added procedures for
mounting the system electronics
information and Power over Ethernet
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
®
LITE transport system. This section
Literature Library

regulatory information

hazardous
system layout guidelines
motor mounting
Requirements, added
information for the node controllers and power
securing the system to the floor
on the frame. Added
connection information and cautions.
network and external communication connections
on the Rockwell Automation
and updated all figures
points on the MM
to it and
on custom motor mounts
mechanical drawings
digital I/O con-
for
with a
21