Simulated Operation Differences - Rockwell Automation MagneMotion MagneMover LITE Original Instructions Manual

• Updated all trademark and copyright information and moved to the back cover.
• Updated the titles and part numbers for all referenced manuals.
• Updated all references for contacting ICT Customer Support to referencing
Automation Support on page
and the
• Updated the appearance of the safety notices to match Rockwell Automation stan-
dards.
• Updated all graphics to current component versions.
• Updated the graphic used for pinch/crush hazards.
• In Chapter 1,
Updated the
• In Chapter 2, Safety
Updated the descriptions of the hazard symbols. Updated the
Information.
• In Chapter 3, Design
Updated the
motor gaps and updated the information about
using Ethernet communication. Added additional details to the
tion.
• In Chapter 4, Specifications and Site
identification in the
to include the Ethernet motors and remove the node controllers. Added
High Altitude
• In Chapter 5,
Ethernet motors. Updated
System Power-up.
• In Chapter 6,
sion Locator Operation
• In Chapter 7,
and wheeled pucks. Updated the
Filter procedure. Updated the
section. Updated the precision rail vehicle maintenance procedures.
• In the Appendix, updated the
• Updated the
Removed the following:
• Removed all references to the MagneMover LITE G3 motors.
• Removed all references to ICT Customer Support, these now refer to the Rockwell
Automation Technical Support Center and TechConnect.
• Removed all detailed information for the node controllers and Ethernet switch. This
information is now in the Node Controller Hardware User Manual, MMI-UM013.
• Removed all references to power regeneration during vehicle deceleration.
MagneMover LITE User Manual
486, TechConnect
Literature Library and
Introduction, updated the
Transport System Software
Guidelines, changed the title from Safety to Safety Guidelines.
Guidelines, updated the
Transport System Design
Mechanical
for the air-cooled motors.
Installation, updated
Facilities
Operation, updated
to include
Maintenance, updated the
Troubleshooting
Transport System
Glossary and Index.
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
℠
(rockwellautomation.custhelp.com),
Product Configurator.
Transport System Components
Overview.
Transport System Layout
section to include an updated description of
Electrical Wiring
Requirements, updated the exposed materials
Specifications. Updated the
Connecting Motors and Electronics
Connections. Updated
Simulated Operation
Operation Using Cylinder Position
Puck Cleaning
Clean or Replace the MM LITE Power Supply Air
section. Updated the
Limits.
Changes
Rockwell
Overview.
Recycling and Disposal
section.
to include motors
System Stands informa-
Communication section
Derating at
to include the
Software Overview
Differences. Updated Preci-
Sensors.
procedures to cover both glide
Contact Support
and
27