Mm R 90° Railless Curve Ethernet Motor Mechanical Drawing - Rockwell Automation MagneMotion MagneMover LITE Original Instructions Manual

Specifications and Site Requirements
Mechanical Specifications
700-1708-42, 700-1708-45
ETHERNET
CONNECTOR
2.49
63.16
2.12
53.88
0.17
4.38
0
1.11
28.15
1.83
46.44
PUCK TRAVEL
PATH
3.06
77.7
Weight: 1.7 kg [3.7 lb]
Figure 4-23: 125 mm R 90° Railless Curve Ethernet Motor Mechanical Drawing
NOTE: See Motors and Switches on page 206
The Sync cable connection is only present if the Synchronization option is installed.
If the Sync Option connector is not installed, a low-profile cap is installed to cover
the connector mounting hole.
The exclusion zones that are shown are for the MM LITE motor only. Additional
exclusion zones may be required based on the material being transported.
Ingress Protection Rating: Designed for IP65 (IEC 60529).
Vibration Rating: 5...500 Hz. @ 2 g.
Shock Rating: 15 g.
Exposed Materials
• Copper alloy, Nickel plate.
• Brass, Nickel plate.
• Zinc, Nickel plate.
• Dow Corning
• A4 SS.
170
POWER CONNECTOR
UPSTREAM
M6X1.0
END
MOUNTING HOLE
MAX ALLOWABLE
TORQUE = 5.5Nm
SYNC CABLE
CONNECTOR
(SYNC MOTOR ONLY)
DIAGNOSTIC
CABLE CONNECTOR
ETHERNET
CONNECTOR
3.06
77.7
3.40 3.73
86.3 94.8
3.40
86.3
R125
3.73
94.8
6.61
167.9
®
Silicone 737 and 734.
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
2.95
5X 75
7mm
1.18
5X 30
6.61
167.9
4.92
All Dimensions in Millimeters [Inches]
for the electrical specifications.
• 316L SS, Passivated.
• A286 SS.
• 300 Series SS, Passivated.
• 303 SS
CLEARANCE NEEDED FOR
CONNECTOR &WIRE BEND RADII
MagneMotion