Replace Pucks - Rockwell Automation MagneMotion MagneMover LITE Original Instructions Manual

Replace Pucks

Pucks must be replaced if they become damaged or worn. Additionally, pucks can be added
to, or removed from, the transport system if the quantity of pucks in use is not correct. If the
transport system does not contain an open spur that can be used to insert or remove pucks, use
the following procedure to replace either glide or wheeled pucks.
NOTICE
Required Tools and Equipment
• Torque wrench with the following bits:
• 4 mm Hex.
• T30 Torx.
• Loctite 243, Thread locker, Anaerobic Adhesive, Blue.
MagneMover LITE User Manual
MAGNETIC FIELD HAZARD: Strong magnets in use.
To avoid severe injury, people with pacemakers and other
medical electronic implants must stay away from the magnet
array on the vehicles (pucks).
PINCH/CRUSH HAZARD: Strong magnets in use.
To avoid injury from strong magnetic attractive forces:
• Handle only one vehicle (puck) or magnet array at a time.
• Do not place any body parts (for example, fingers)
between a magnet array and any ferrous material or
another magnet array.
• Vehicles (pucks) and magnet arrays not being used must
be secured individually in isolated packaging.
Strong magnets in use.
To avoid damage to watches, instruments, electronics, and
magnetic media, keep metal tools, metal objects, magnetic
media (for example, memory disks/chips, credit cards, and
tapes) and electronics away from the magnet arrays.
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
Maintenance
Repair
399