Upload Configuration Files And Restart - Rockwell Automation MagneMotion MagneMover LITE Original Instructions Manual
Hide thumbs
Also See for MagneMotion MagneMover LITE:
- Service manual (138 pages) ,
- User manual addendum (31 pages)
Table of Contents
Advertisement
Maintenance
Repair
2.
Create a MICS file for the path with the Ethernet motors (see
File on page
Upload Configuration Files and Restart
1.
Upload the revised Node Controller Configuration File to the node controller and
restart the node controller.
2.
Upload the MICS file to the node controller and restart the node controller.
3.
Upload the Motor Type files for the Ethernet Motors.
4.
Program the new motors with the current Motor image files, see
Motors on page
5.
Revise the host controller application to account for the new path in the transport sys-
tem.
6.
Resume motion on the MagneMover LITE transport system.
390
97).
387.
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
Ethernet Motor MICS
Program RS-422
MagneMotion
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the MagneMotion MagneMover LITE and is the answer not in the manual?
Questions and answers
Can you tell me if Puck part number 703-1207-00 Rev2 is still available. If not is Puck part number 703-1663-00-R2 capable / replacement for 703-1207-00-Rev2 Puck