Install The New Motor - Rockwell Automation MagneMotion MagneMover LITE Original Instructions Manual

Maintenance
Repair
10. Store the motor in a secure location.
11. See Shipping on page 458

Install the New Motor

1. See Motor Installation on page 254
2. Reference the labels that were previously placed on the cables and reconnect the
cables to the motor.
3. Restore power to the section of the MM LITE transport system where the motor was
replaced.
4. Revise the MICS file and upload it to all node controllers.
5. Program the new motor with the current Motor ERF Image files (see
net Motors on page
6. Resume motion on the section of the MM LITE transport system where the motor was
replaced.
392
to return the motor to MagneMotion.
for detailed installation instructions.
393).
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
Program Ether-
MagneMotion