Straight And Curve Motors; Magnemover Lite Rs-422 Motor Electrical Connections - Rockwell Automation MagneMotion MagneMover LITE Original Instructions Manual

Specifications and Site Requirements
Electrical Specifications

Straight and Curve Motors

See 1000 Millimeter Motors
drawings.
NOTE: The motors draw an additional 15 W of power per vehicle (puck) when the vehicle is
moving at maximum acceleration or velocity (see
RS-422
Connector
Sync Option
Connector
Connector
Figure 4-56: MagneMover LITE RS-422 Motor Electrical Connections
Table 4-10: MagneMover LITE RS-422 Motor Electrical Connections
Label
CM1
CM2
P1
*
S1
* The Sync Option Connector is only present if the Synchronization option is installed. If the Sync Option con-
nector is not installed, a low-profile cap is installed to cover the connector mounting hole.
208
through 125 Millimeter Radius 90° Curve Motors
Straight Motor Sections
Curve Motor Sections
RS-422
Description
RS-422 communication
RS-422 communication
Power +36V DC ±10%
1000 mm motor – 1.5 A typical 5.0 A max
250 mm motor – 0.4 A typical, 1.2 A
Curve motor – 0.4 A typical, 1.2 A
External Synchronization
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
Table
Bottom View
Sync Option
Bottom View Connector
M8 Nano-Mizer
M8 Nano-Mizer, 4-Pin, Plug
Mini-Conn-X
max
max
Micro-Mizer
for mechanical
4-9).
RS-422
Connector
Power
Connector
RS-422
Connector
Power
Connector
Connector Type
®
, 4-Pin, Plug
®
, 4-Pin, Plug
®
, 8-Pin, Plug
MagneMotion