Rev. E - Rockwell Automation MagneMotion MagneMover LITE Original Instructions Manual

Changes
• In Chapter 5,
dures. Added railless motors to the
Array Installation. Added
• In Chapter 6,
• In Chapter 7,
Maintenance, Troubleshooting, and
• In the Appendix, added
Updated the following:
• Updated the Magnet Hazard Warnings throughout the manual.
• In Chapter 2, Safety
siderations
• In Chapter 3, Design
tem Layout
Updated the description of attractive force in the
Magnet Arrays
• In Chapter 4, Specifications and Site
to show both millimeters and inches. Corrected the power supply connections and
indicators tables for the MM LITE power supply and the NC-12 node controller. Cor-
rected the NC-12 node controller connections and indicators tables.
• In Chapter 5,
lation. Updated the communication and power cable connection illustrations.
• In Chapter 7,
• In the Appendix, updated the
Removed the following:
• All references to the standard node controller (replaced by the NC-12 node controller).
Support for the standard node controller, including software, spare parts, technical
support, and service continues to be available.
• Details of the MM LITE G3 series motors, switches, and pucks, which have been
replaced by the G4 series motors, switches, and pucks. The G4 series motors and
switches are fully backward compatible with the G3 series. The G3 series motors,
switches, and pucks are discontinued items and are not UL Recognized. Support for
the G3 series motors, switches, and pucks including software, spare parts, technical
support, and service continues to be available.

Rev. E

Added the following:
• In Chapter 1,
• In Chapter 2, Safety
and Shipping Magnet
24
Installation, added requirement for Loctite curing to installation proce-
Precision Rail
Operation, added a description of
Maintenance, added
File Maintenance
Guidelines, updated the
sections.
Guidelines, updated the Puck description in the
section. Updated the System Design
description.
Installation, updated the list of
Maintenance, updated the
Transport System
Introduction, added information about the precision locator option.
Guidelines, added
Arrays.
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
Stand System Installation
Installation.
Block Acquisition.
Replace Precision Rail
Repair procedures.
instructions.
Regulatory Compliance
Overview
Design Guidelines. Corrected the
Requirements, updated all
Required Tools and Equipment
Replace Glide Puck Wear Surfaces
Limits.
Pneumatic Hazards,
section. Added Magnet
Vehicles, and Preventive
and Safety Con-
Transport Sys-
and Design Guidelines.
mechanical drawings
for instal-
procedure.
Handling Magnet Arrays,
MagneMotion