Troubleshooting; Initial Troubleshooting; Power-Related Troubleshooting - Rockwell Automation MagneMotion MagneMover LITE Original Instructions Manual

Troubleshooting

This section describes the common difficulties that can be encountered with the MagneMover
LITE transport system components and software.
For assistance, see

Initial Troubleshooting

This section covers the initial determination of the problem area within the MagneMover
LITE transport system and provides direction to the second step of the troubleshooting pro-
cess. If a specific problem is suspected, see that problem in
been identified, review each of the symptoms that are identified in
the problem area.
Power lights do not turn on.
Reset of switch and paths that are associated
with the switch fails.
Motors report power-related faults.
Vehicles do not seem to move as fast as when
the MagneMover LITE transport system was
initially installed.
Node controller logs do not indicate correct
time.
MM LITE transport system does not respond to
the host controller.
Vehicles producing excessive noise.
The light stack does not function as expected.
MagneMover LITE User Manual
Contact Rockwell Automation Technical Support on page
Table 7-3: Initial Troubleshooting
Symptom
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
Table 7-3. If the problem has not
Table 7-3
Possible Problem Area
See Power-Related Troubleshooting on page 372
See Power-Related Troubleshooting on page 372
See Motion Control Troubleshooting on page 377
See Precision Rail Option Troubleshooting on
page 380
See Node Controller Troubleshooting on page 375
See Communication Troubleshooting on page 376
See Motion Control Troubleshooting on page 377
See Motion Control Troubleshooting on page 377
See Precision Rail Option Troubleshooting on
page 380
See Light Stack Troubleshooting on page 381
Maintenance
Troubleshooting
382.
to help determine
371