Rockwell Automation MagneMotion MagneMover LITE Original Instructions Manual page 468

Downstream Gap
Downstream Gap:
Drive:
Emergency Off:
Emergency Stop:
EMO:
Entry Gate:
Entry Path:
Equivalent-Route Path: A path in a set of Moving Path node member paths that offers a route to a
E-stop:
Ethernet Chain:
Exit Path:
Fixed Path:
Following Vehicle:
Forward Direction: The default direction of motion, from
Glide Puck:
Global Directives:
Ground:
Guideway:
468
The physical distance from the end of the stator in one motor to the beginning
of the stator in the next motor downstream on the same path. This distance
includes the Motor Gap.
The remote QSMC motor controller or the QSHT 5700 inverter for a QSHT
motor.
A user-supplied device that disconnects AC power to the transport system.
A user-supplied circuit with a locking button that anyone can press to stop
motion in the transport system. It can be wired through the digital I/O on some
Node Controllers.
See Emergency Off.
The position on a path associated with a node where the leading edge of a vehi-
cle is considered cleared from the node. See
A path whose downstream end is a member of a node. A vehicle that is moving
downstream enters a node on an entry path.
destination that is reachable via any other path in the set.
See Emergency Stop.
Ethernet chains allow devices to be connected in series with standard Ethernet
cable, without the need for additional network switches. A daisy chain device
has two embedded Ethernet ports that function as an Ethernet switch and an
interface to the local device. This embedded switch allows information to flow
to the device, or flow through the ports to other devices in the chain.
A path whose upstream end is a member of a node. A vehicle that is moving
downstream exits a node on an exit path.
A path whose position is fixed in the track layout. See
A vehicle following another vehicle in a platoon. This vehicle can be following
either the lead vehicle or another following vehicle.
Motion transport system.
A preconfigured vehicle for use on MagneMover
uses low friction skids to slide on the integral rails.
The Demo Script commands that define the general operating characteristics
for all vehicles specified. See also
The reference point in an electrical circuit from which voltages are measured.
This point is typically a common return path for electric current. See also PE.
A component of the Track System
tact with the Vehicle, either through wheels or low friction runners on the vehi-
cle. The guideway maintains the proper relationship between the vehicles and
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
Node Clearance
Moving
Upstream to Downstream, on a Magne-
®
LITE transport systems that
Vehicle Directives.
that consists of rails or other devices in con-
Distance.
Path.
MagneMotion