Saving Plc Data In External Devices To The Nc - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.11 Basic Operation

6.11.5.2 Saving PLC Data in External Devices to the NC

The following diagram illustrates the procedure to save PLC data in external devices to the NC.
To use only one project
Procedure
After the PLC on-board starts, the system automatically reads
PLC data and transitions to the ladder screen. The monitor
Start
also starts.
Ladder
Return to the main screen.
Main/
Stop the PLC.
Main/External file operation
PLC RUN/STOP
Main/External file operation
Open the program in the
external device into the
on-board.
Select external project
Main/External file operation/
External -> NC
Complete
IB-1501614-B
Operation
Mode 1 Menu button
EXT. FILE OPERATION
PLC RUN/STOP
STOP EXECUTE
EXT. -> NC
READ
332
Display the PLC RUN/STOP popup
screen.
Stop the PLC.
The select external project popup
screen is displayed.
Select the project data saved in the
external device.
Store the project data stored in the
external device into the temporary
memory area in the NC.