Figure 1.8 [Partition Event Log Filtering Condition] Window; Table 1.26 Display And Setting Items In The [Partition Event Log Filtering Condition] Window; Table 1.27 Buttons In The [Partition Event Log Filtering Condition] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations

FIGURE 1.8 [Partition Event Log Filtering Condition] window

TABLE 1.26 Display and setting items in the [Partition Event Log Filtering Condition] window

Item
Partition Specify the partitions to be displayed.
The selected radio button is either [All] or [Specified].
For users with Partition Operator privileges, [All] is grayed out and not available. For
partition filtering, only the partition under their management can be selected.
By default, [All] is selected for users without Partition Operator privileges. For users with
Partition Operator privileges, [Specified] and the managed partitions are selected by
default.
Number of events to Specify the number of logs to be displayed.
display
The denominator represents the total number of logged events.
The maximum specifiable value is 1,000.
The default is 100.

TABLE 1.27 Buttons in the [Partition Event Log Filtering Condition] window

Button
Apply Click the [Apply] button to list those logs that match the specified conditions in the
[Partition Event Log] window.
Cancel Click the [Cancel] button to return to the [Partition Event Log] window.
- All: Filtering by partition is not applied.
- Specified: Filtering by partition can be set. Check the check boxes for the partitions
to be displayed.
Description
Description
72 C122-E110-10EN