Table of Contents
Advertisement
Saving the Setup Table (Measurement point, Calibration kit, Compensation
Saving the Setup Table (Measurement point, Calibration kit,
Compensation kit) in CSV Format
The following procedure can be used to save the setting values and measurement result list
components of the measurement point setup table, calibration kit setup table and
compensation kit setup table of the 4287A on a storage device (built-in nonvolatile
memory or floppy disk) in the CSV format (.csv).
Step 1. Set the 4287A to show the setup table that you want to record.
Step 2. Click with the mouse "1.File" in the setup display menu bar to display the pull-down menu.
Step 3. Click "1.Export..." in the pull-down menu to display the setup table save as window.
Figure 10-6
Save As window for saving the setup table
Step 4. Enter the filename in the File name box. If you want to enter the filename using the mouse,
see "Entering the Filename using the Mouse" on page 215.
NOTE
The user is not required to add the extension following the filename (the ".csv" filename
extension is automatically added).
Step 5. Press the
Chapter 10
Storing and Retrieving 4287A Internal Information and File Management
key to save the setup table.
Save
kit) in CSV Format
219
Advertisement
Table of Contents
