FX-1/FX-1R Maintenance Manual
DANGER
[14] AUTO BOARD WIDTH ADJUSTMENT
14-1. Assembling the AWC Bracket
SL6041242TN
MOTOR FIX BOLT ×4
Motor shaft is retracted 0.5 mm
from the motor pulley.
Assemble the components so that the end face of the AWC motor shaft is retracted 0.5 mm from the
AWC motor pulley.
Regardless of the transport reference and flow direction, always assemble the components in the
same direction.
To prevent any trouble caused by accidental machine start, always
shut-down the power before starting the maintenance and
adjustment work.
L172E421000
AWC MOTOR BRKT
Figure 14-1-1
E4855729000
AWC MOTOR PULLEY
L900E321000
AWC MOTOR
14-1
SM8040402TP
SET SCREW ×2
Rev. 2.00