JaNets JT Simple Instruction Manual for the setup and change of the line
5. Line setting
5-1. Adding a line
Select the Basic configuration > Line ... ① and press the +Add button ... ②.
The line setting screen is displayed. Enter a Line name ... ③, Line number ... ④,
Floor ... ⑤, Shift ... ⑥ and Target output-quantity of shift ... ⑦.
* As many as 30 half-width characters or 15 full-width characters can be entered
as a line name.
* Avoid duplication of the line name in the System.
* Avoid duplication of the line number in the floor.
* As many as two shifts can be entered.
After you have entered the line data, press the Save button .... ⑧ to confirm the
data you have entered.
②
①
③
⑥
④
⑦
17 / 30
⑤
⑧