Replacing The Occ Front/Angle Light Board Assembly - JUKI KE-1070 Maintenance Manual

4-3. Replacing the OCC Front/Angle Light Board Assembly

(1) Detach the light assembly from the head plate using the procedure described in 4-1.
"Replacing the OCC Assembly".
(2) Remove the pan head machine screw
(3) Remove the washer assembled hexagon socket head cap bolt
light board assembly.
(4) Reassemble the components in the reverse order of disassembly.
(5) After replacement, it is necessary to adjust the light filter U and OCC light. (See 4-8. "List of
Readjustment Items After Replacement".)
Figure 4-3-1 Replacing the OCC Front/Angle Light Board Assembly
Maintenance Guide
to detach the OCC front light board assembly.
4-3
to detach the OCC angle
Pan head machine
screw ( 2)
Front light
board assembly
Angle light
board assembly
Washer assembled
hexagon socket
head cap bolt ( 4)