Table of Contents
Advertisement
4) Emergency stop
When the emergency stop switch is pressed during operating, the following message will be shown on the
display screen.
＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊
C H E C K →
The operation process when the emergency stop switch is pressed determines when and how the operation
is stopped or how the emergency stop is released.
1 When the emergency stop switch is pressed after the knee switch has been pressed and the work clamp
has lowered, the work clamp will go up and stop in its highest position.
Press
switch, and the indication on the screen will return to the standard display.
2 When the emergency stop switch is pressed when sewing a button, the sewing machine stops after the
button sewing is finished.
Press the
3 When the emergency stop switch is pressed when the carriage is moving (indexing), the sewing machine
stops as soon as the switch is pressed.
Press the
button and the machine operation mode will be changed to the manual operation mode.
4 When the emergency stop switch is pressed when the last button(in men's garment bod) is veing sewn
or when the carriage is returning to the origin upon completion of button sewing, the sewing machine
stops as soon as the switch is pressed.
Press the
button and the machine operation mode will be changed to the manual operation mode.
5) Error message and the reset procedure
1
0 1
＊ ＊ ＊ ＊ ＊ ＊
Cause
: If the needle thread breaks or
needle thread stitch error
occurs, the above error
message will be shown on the
display screen.
How to reset : Re-thread the needle, and
press
(Caution) Do not press the reset switch
before threading the machine
head.
2
0 2
＊ ＊ ＊ ＊ ＊ ＊ ＊
Cause
: If the remaining amount of bobbin thread is not enough (when the bobbincounter indicates
"0" or the remaining amount of bobbin thread is too short to finish one piece of garment),
the above error message will be shown on the display screen.
How to reset : Under the automatic operation mode, replace the bobbin, and press
E M E R G E N C Y
R E S E T →
switch, and the machine operation mode will automatically change to the manual.
switch, and the carriage will automatically return to the sewing start position of the 1st
switch, and the carriage will automatically return to the sewing start position of the 1st
N E E D L E
T H R E A D
S T I T C H
CHECK → RESET → START
switch 1.
B O B B I N
B O B B I N
C H A N G E → R E S E T →
＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊
S T O P
S T A R T
S T I T C H
E R R O R
T H R E A D
E R R O R
S T A R T
36
−
−
＊ ＊ ＊ ＊ ＊ ＊
1
＊ ＊ ＊ ＊ ＊ ＊ ＊
switch
.
Advertisement
Table of Contents
