Settings For Additional Numbers - Auerswald COMpact 5000 Operation Manual

Phone number for CLIP no screening
Requirements:
• Set up phone number
• CLIP no screening switched on for the ISDN connection
Customer-specific phone number (e.g. a service phone number) that is transferred to the desti-
nation by the exchange line without its correctness being checked.
Name
The name is used for display purposes on the system telephone.
Ringtone
The ringtone specifies which sequence of sounds is used to signal external calls to internal
subscribers on the PBX.
Note: See the Settings > Ring tones section for information about exceptions
to signalling and sound sequences.
New
Adds a new phone number.
Delete
Deletes the entries marked in the list.

Settings for Additional Numbers

Proceed as follows:
• Separately for PBX base numbers
• Using the Configuration Manager (page Public switched tel. networks > ISDN connec-
tions > Additional PTP connection numbers)
Requirements:
• Configured PBX base number
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Settings
ISDN Connection
Settings for Additional Numbers
617