Restore Factory Settings At The Touch Of A Button - Auerswald COMpact 5200 Advanced Information

Appendix Matériel
Buttons
After a few seconds, the blinking of the Status LED will slow down.
3. Let go of the Software altern. button.
The Firmware is restored.

Restore Factory Settings at the Touch of a Button

If the factory settings on the PBX are restored, all of the settings are deleted
or reset to the original settings before the device was first configured.
Warning: Touching voltage-carrying conductors or phone
connections can cause life-threatening electric shocks.
• For some installation and maintenance work, it is
• Only a qualified electrician may perform installation work
Warning: Power surges, which can occur during electrical
storms, can cause life-threatening electric shocks and
damage or destroy the PBX.
• Do not open the PBX during an electrical storm.
1. Press the Reset button on the CPU module.
1032
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
necessary to open the PBX while it is in operation (qualified
electrician only). Make sure that the PBX is never left
unattended while working with an open casing. Close the
casing after completing this work.
within an open casing or service work using the buttons
inside the casing. If necessary, commission an authorised
dealer to perform this work.