Buttons
On the CPU module of the PBX, the various buttons are located to e. g.
reboot the PBX, to restore the previous firmware or to set the PBX to factory
settings.
Performing a Restart Immediately by Pressing a Button
Warning: Touching voltage-carrying conductors or phone
connections can cause life-threatening electric shocks.
• For some installation and maintenance work, it is
• Only a qualified electrician may perform installation work
Warning: Power surges, which can occur during electrical
storms, can cause life-threatening electric shocks and
damage or destroy the PBX.
• Do not open the PBX during an electrical storm.
1. Press the Reset button on the CPU module.
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
necessary to open the PBX while it is in operation (qualified
electrician only). Make sure that the PBX is never left
unattended while working with an open casing. Close the
casing after completing this work.
within an open casing or service work using the buttons
inside the casing. If necessary, commission a specialised
dealer to perform this work.
Appendix Matériel
Buttons
1029
Need help?
Do you have a question about the COMpact 5200 and is the answer not in the manual?
Questions and answers