Auerswald COMpact 5200 Advanced Information page 1022

Settings – Administration
Logs
Décodeur de canal D
Install the D-channel decoder PC programme and initiate logging (see
chapter Functions, Uses, Concepts > Service Data > Recording the D-
Channel Protocol).
Serveur Syslog
Enter the IP address and the port of the syslog server.
Configuring the syslog server
A protocol can be recorded to log and display control and management
information about the connections to the PBX e.g. to display errors. You will
thus be able to see the error type, and maybe even its cause, from the list
of transferred information.
Requirements:
• Syslog server configured by the system administrator
• Knowledge of the IPv4 or IPv6 address and UDP port number of the
syslog server
IP serveur Syslog
Enter the IPv4 or IPv6 address of the syslog server.
Port serveur Syslog
Enter the UDP port number of the syslog server.
Logging of the connection data will start as soon as you have saved your
settings.
1022
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018