Diagnostics
10.5 Reducing the number of alarms
Alarm 27124
By assigning priorities to alarms, alarms with the power on clear criterion are also
cleared or no longer displayed. In spite of this, the system is in a state in which a
power on is required. If alarm 27024 "STOP A initiated" has occurred, but is no
longer displayed, then at least group alarm 27124 "STOP A for at least 1 axis" is
displayed.
10-800
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
© Siemens AG 2015 All Rights Reserved
10/15