Siemens Sinumerik 840D sl Function Manual page 618

Diagnostics
10.1 Troubleshooting procedure
10.1.3 Integrating safety SPL user alarms
Preconditions
In order to integrate the alarm text extension for SINUMERIK Operate, the "HMI
Solutionline Alarm Text Converter" is used. Using this converter, it is possible to
convert alarm text extensions, which were already generated on an HMI Advanced
or a self--generated alarm text extension (in *.com format) into the *.ts format
required for SINUMERIK Operate, and to integrate this using WINSCP.
The alarm text converter is included in the scope of delivery of the software
(setup_alarmtextconverter.exe).
Converting SINUMERIK Operate Safety user alarms from PCU50
Start the alarm text converter and allocate a filename under "Output File Prefix"
(e.g. user_alsi).
Figure 10-26 Allocating a file name
The source directory is specified in "Source Path".
10-618
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
© Siemens AG 2015 All Rights Reserved
10/15