Siemens Sinumerik 840D sl Function Manual page 645

10/15
© Siemens AG 2015 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
15
The setting in MD36936 $MA_SAFE_CAM_POS_PLUS[0] + MD36940
$MA_SAFE_CAM_TOL does not correspond with the associated drive
parameter assignment.
Remedy
Copy SI data.
16
The setting in MD36936 $MA_SAFE_CAM_POS_PLUS[0] does not
correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
17
The setting in MD36937 $MA_SAFE_CAM_POS_MINUS[0] +
MD36940 $MA_SAFE_CAM_TOL does not correspond with the
associated drive parameter assignment.
Remedy
Copy SI data.
18
The setting in MD36937 $MA_SAFE_CAM_POS_MINUS[0] does not
correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
19
The setting in MD36936 $MA_SAFE_CAM_POS_PLUS[1] + MD36940
$MA_SAFE_CAM_TOL does not correspond with the associated drive
parameter assignment.
Remedy
Copy SI data.
20
The setting in MD36936 $MA_SAFE_CAM_POS_PLUS[1] does not
correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
21
The setting in MD36937 $MA_SAFE_CAM_POS_MINUS[1] +
$MA_SAFE_CAM_TOL does not correspond with the associated drive
parameter assignment.
Remedy
Copy SI data.
22
The setting in MD36937 $MA_SAFE_CAM_POS_MINUS[1] does not
correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
23
The setting in MD36936 $MA_SAFE_CAM_POS_PLUS[2] + MD36940
$MA_SAFE_CAM_TOL does not correspond with the associated drive
parameter assignment.
10.2NCK safety alarms for Sinumerik 840D sl
Diagnostics
10-645