Parameters For Sinamics S120 - Siemens Sinumerik 840D sl Function Manual

Data Description

8.2 Parameters for SINAMICS S120

8.2 Parameters for SINAMICS S120
Note
Some safety parameters for the motion monitoring functions on the CU are
protected with access level 4 (manufacturer access) which means that as
standard, they are not visible in the expert list of the STARTER drive
commissioning tool. However, the access stage is reduced as a result of a
user--specific view for SINUMERIK 840D sl to 3 (expert access) so that the safety
parameters for the motion monitoring functions are visible on the HMI without
having to enter a password for the access stage.
This comment must be taken into account for all safety parameters for the motion
monitoring functions (name "SI Motion...") that are listed in the following Chapters:
There, standard access level 4 is sometimes specified, while in operation with
SINUMERIK 840D sl, access level 3 is actually effective.
The following parameters are available:
S Safety parameters for the Control Unit
S Safety parameters for the Motor Module
Parameter number
The parameter number consists of a leading "p" or "r", followed by the parameter
number and the index (optional).
Examples of the representation in the parameter list:
S p...
S r...
S p0918
S p0099[0...3] adjustable parameter 99, indices 0 to 3
S p1001[0...n] adjustable parameter 1001, indices 0 to n (n = configurable)
S r0944
Other examples of notation in the documentation:
S p1070[1]
S p2098[1].3
S r0945[2](3) visualization parameter 945, index 2 of drive object 3
S p0795.4
S r2129.0...15 display parameter 2129 with bit field (maximum 16 bit)
The possible data types of parameter values are as follows:
I8
I16
I32
U8
8-430
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
adjustable parameters (can be read and written to)
visualization parameters (read--only)
adjustable parameter 918
visualization parameter 944
adjustable parameter 1070 index 1
adjustable parameter 2098 index 1 bit 3
adjustable parameter 795 bit 4
Integer8 8 bit integer number
Integer16 16 bit integer number
Integer32 32 bit integer number
Unsigned8 8 bit without sign
© Siemens AG 2015 All Rights Reserved
10/15