Siemens Sinumerik 840D sl Function Manual page 490

Data Description
8.2 Parameters for SINAMICS S120
p10230[0...5] SI IMotion SBT control word
Sets the signal sources for the safe brake test control word.
This parameter is only applicable for "SBT via BICO" (p10203 = 1).
[0] = select brake test
[1] = start brake test
[2] = select brake
[3] = test torque select sign
[4] = select test sequence
[5] = external brake status
Note
For BI: p10230[0]:
0/1 signal: Select the brake test.
0 signal: inactive.
For BI: p10230[1]:
0/1 signal: Start brake test.
For BI: p10230[2]:
1 signal: Select brake 2.
0 signal: Select brake 1.
For BI: p10230[3]:
1 signal: select negative test torque.
0 signal: select positive test torque.
For BI: p10230[4]:
1 signal: Select test sequence 2.
0 signal: select test sequence 1.
For BI: p10230[5]:
1 signal: External brake closed.
0 signal: External brake open.
Unit: Default value:
- - 0
r10231 SI Motion SBT control word diagnostics
Display of the diagnostic bits for the safe brake test control word.
Bit signal name
00 select brake test
1 signal: Yes, 0 signal: No
01 start brake test
1 signal: Yes, 0 signal: No
02 select brake
1 signal: Brake 2, 0 signal: Brake 1
03 test torque select sign
1 signal: Negative, 0 signal: Positive
04 select test sequence
1 signal: test sequence 2, 0 signal: test sequence 1
05 external brake status
1 signal: Closed, 0 signal: Open
See also: p10203
The bits show the actual control signals of the control set in p10203.
Unit: Default value:
- - - -
8-490
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
Minimum value: Maximum value:
- - - -
Minimum value: Maximum value:
- - - -
Checksum: Protection level:
Yes 3
Data type: Effective:
Unsigned32/ POWER ON
Binary
Checksum: Protection level:
Yes 3
Data type: Effective:
Unsigned32 POWER ON
© Siemens AG 2015 All Rights Reserved
10/15