Alarms, Faults And System Messages; Status Led Overview - Siemens SINAMICS G115D Operating Instructions Manual

Alarms, faults and system messages

The converter has the following diagnostic types:
• LED
The LEDs of the converter immediately inform you about the most important converter
states.
• Alarms and faults
Every alarm and every fault has a unique number.
The converter signals alarms and faults via the following interfaces:
– Fieldbus
– Terminal strip with the appropriate setting
• Identification & maintenance data (I&M)
If requested, the converter sends data to the higher-level control via PROFINET:
– Converter-specific data
– Plant-specific data
8.1

Status LED overview

LED status indicators
A G115D converter has a number of LEDs which are designed to indicate the operational
state of the converter. The LEDs are used to indicate the following states:
• General fault conditions
• Communication status
• Safety-Integrated status
• Input and output status
SINAMICS G115D distributed drive
Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B
8
297