Siemens Sinumerik 840D sl Function Manual page 555

10/15
Telegram configuration
The screen to configure the telegram is displayed by pressing the "Telegram
configuration" softkey:
Figure 9-6 Settings -- telegram configuration
You can make the following settings in the "Settings -- Telegram configuration"
window:
S Enable SIC/SCC
Only active for basic functions and extended functions. The following options
can be configured:
-- SIC/SCC module number
Activates the enable and setting of the SIC/SCC module number.
-- Telegram configuration (p60122)
Sets the telegram for the Safety Info Channel (SIC)/Safety Control Channel
(SCC) In this case, telegram 701 is selected.
When required, each setting in this dialog window can also be made via a para-
meter list.
The ">>" softkey is pressed again and the settings saved.
© Siemens AG 2015 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
9.1 Pictures of the user interface and softkeys
Commissioning
9-555