Service Displays - Siemens Sinumerik 840D sl Function Manual

10/15
S
Safe Brake Adapter, 4-68
Safe brake management, 7-324
Safe cam track, 6-176, 6-180
Safe cams, 6-175
Safe end positions, 6-171
Safe operating stop
Deselection, 6-118
Features, 6-115
Preconditions, 6-116
Selection, 6-116
Safe software cam
Features, 6-175
Preconditions, 6-177
Special case, 6-177
Tolerance, 6-175
Hysteresis, 6-178
Safe software limit switch
Configurable stop responses, 6-173
Features, 6-171
Limits, 6-171
Preconditions, 6-172
Safe speed
Configured stop responses, 6-156
Features, 6-151
Preconditions, 6-151
Selection, 6-153
Safe speed monitoring, 6-164
Safe standstill
Features, 6-110
Selecting/deselecting, 6-110
Safe Stop 1, 4-63
Safely limited speed, 6-151
Changing--over the limit values, 6-154
Override for, 8-501
Safety, A-824
Safety Control Channel, 7-344
Safety function, A-824
Safety goal, A-824
Safety Info Channel, 7-344
Safety Integrated
Acknowledging faults, 4-81
Function diagram overview, 4-84
Parameter overview, 4-82
Password, 4-55
Stop responses, 4-80
Safety Integrity Level (SIL), A-824
Safety power on, 7-296
Safety relay, 7-308
Safety relay, test, 7-313
Save stop position, 5-98
Saved stop position, 5-98
© Siemens AG 2015 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
SBH, 6-115
SBR, 6-147
SBT, 7-324
SCC, 7-344
Axis signals, 8-528
SE, 6-171
Selecting speed limit values, 6-153
Selector gearbox, 5-101
Series commissioning, 9-568
Service display, 7-191
Servo trace, 9-573
Set axis monitor, 9-566
Set password, 9-563
SG, 6-151
SG override, 6-159, 8-501
SG specific STOPs, 6-158
SGA, SBH active, 6-119
SGE/SGA
Signal propagation times, 7-195
Minimum number, 7-193
SGE/SGA assignment, for 840D sl, 9-566
SGEs, Standstill via STOP, 6-126
SI I/O, 10-612
SI relay, 7-308
SIC, 7-344
Axis signals, 8-528
Sim--NCK systems, 11-808
SIRELAY, 7-312
Slip for 2--encoder system, 5-103
Slot mode
Input modules, 7-235
Output modules, 7-237
SN, 6-176
Speed/standstill monitoring, 2-33
SPL assignment (RDP), 7-262
SPL assignment (SDP), 7-251
SPL connection, identifier (SDP), 7-250
SPL data on the PLC side, 7-321
SPL I/O--communication, 7-233
SPL start without axial safety enable, 7-296
SPL system errors, 7-289
SPL--SGA, PROFIsafe, 7-225
SPL--SGE, PROFIsafe, 7-221
SS1, 4-63
Standstill tolerance, 6-115
Standstill via SGEs, 6-126
Start SPL, 7-299
StateFault, 7-233
STO, 4-60
STOP A, Description, 6-129
STOP C, Description, 6-133
Stop Category, A-824
Index
I-827