Siemens Sinumerik 840D sl Function Manual page 469

10/15
r9724 SI Motion, cross- -check cycle
Displays the crosswise data comparison clock cycle.
The value specifies the clock cycle time with which each individual CDC value
is compared between the two monitoring channels.
See also: p9500
Crosswise comparison clock cycle = monitoring clock cycle (p9500) * number
of data to be compared crosswise
Unit: Default value:
ms - -
r9725[0..2] SI Motion diagnostics STOP F
Displays the message value that resulted to a STOP F on the drive.
Value = 0: STOP F was signaled from the Control Unit.
Value = 1 ... 999: Number of the incorrect data for a crosswise data comparison
between the two monitoring channels.
Value >= 1000: Additional diagnostic values of the drive.
For index 1:
Display of the value of the Control Unit, which resulted in the STOP F.
For index 2:
Display of the value of the second channel, which resulted in the STOP F.
Note: The significance of the individual values is described in Alarm 27001 of
the higher- -level control.
[0] = message value for a crosswise data comparison
[1] = Control Unit crosswise data comparison actual value
[2] = Component crosswise data comparison actual value
See also: C01711
Unit: Default value:
- - - -
p9726 SI Motion user agreement selection/deselection
Setting to select/deselect the user agreement
0: [00 hex] deselect user agreement
172: [AC hex] select user agreement
See also: r9727
Unit: Default value:
- - 0000 hex
r9727 SI Motion internal drive user agreement
Displays the internal status of the user agreement
Value = 0: User agreement is not set
Value = AC hex: User agreement is set
See also: p9726
Unit: Default value:
- - - -
© Siemens AG 2015 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
Minimum value: Maximum value:
- - - -
Minimum value: Maximum value:
- - - -
Minimum value: Maximum value:
0000 hex 00AC hex
Minimum value: Maximum value:
- - - -
Data Description
8.2 Parameters for SINAMICS S120
Checksum:
No
Data type:
Floating Point32
Checksum:
No
Data type:
Unsigned32
Checksum:
No
Data type:
Integer16
Checksum:
No
Data type:
Integer16
Protection level:
3
Effective:
- -
Protection level:
3
Effective:
- -
Protection level:
3
Effective:
immediately
Protection level:
3
Effective:
8-469