Siemens Sinumerik 840D sl Function Manual page 602

Diagnostics
10.1 Troubleshooting procedure
S "Save" softkey
With this softkey, the values of the checksum for all drives and axes are saved
in an XML file, which is selected by the user.
S "Details" softkey
This softkey is used to select detailed information concerning the selected
checksum.
SI configuration
You can go to the SI configuration menu by pressing the softkey "SI configuration".
Figure 10-7 SI configuration
An overview of the safety options that have been set is displayed in the upper
section of this diagnostics screen.
The Safety checksums for the NCK, the axis and the drive are shown in the lower
window section.
10-602
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
© Siemens AG 2015 All Rights Reserved
10/15