A.1 Customer Support - Siemens Sinumerik 840D sl Function Manual

Appendix
A.1 Customer Support
The Center of Competence Service (CoCS) -- Sinumerik Safety Integrated
users a wide range of services.
Contact addresses
Hotline:
Contact:
Table A-1 Range of services for machine manufacturers and end customers
Portfolio
Concept development
Standard engineering
SPL configuration
Commissioning
© Siemens AG 2015 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
Tel.: 0180--5050--222
Fax: 0180--5050--223
Email: ad.support@siemens.com
Inquiry with subject 840D Safety Integrated
Tel.: +49 (0) 9131 98 4386
Fax: +49 (0) 9131 98 1359
Description of services
The safety functions are adapted to the machine based on the hazard analy-
sis and the customer's operating philosophy. This includes e.g.:
Planned operating modes
S
Safety functions when the protective doors are closed
S
Safety functions when the protective doors are open
S
Emergency Stop concept
S
A study of the safety--related external signals and elements
S
Based on the concept developed, the standard functions
Safe standstill (SH), safe operating stop (SBH)
S
Safely reduced speed (SG)
S
are integrated into the circuit diagram of the machine. External safety ele-
ments (e.g. door interlocking, Emergency Stop button, ...) are either configu-
red conventionally or logically combined using the "safe programmable lo-
gic" (SPL) function.
Based on the standard configuration, the following SPL objects are created:
Function diagram
S
Logic program for the PLC area
S
Logic program for the NC area
S
Data blocks required (e.g. DB 18)
S
These objects are incorporated/linked into the complete system
The safety functions are commissioned based on the configuration that has
been created. The customer provides the machine so that the drives can be
traversed and the control cabinet is wired according to the configuration.
A
®
offers
A-815