Configuring And Parameterizing The Profisafe I/O - Siemens Sinumerik 840D sl Function Manual

Connecting Sensors/Actuators
7.2 Connecting I/O via PROFIsafe
7.2.3

Configuring and parameterizing the PROFIsafe I/O

The configuration of the PROFIBUS/PROFINET I/O connections on the PLC side
of a SINUMERIK 840D sl is defined using the Step7 component HW Config. There
are two options:
S Integrating Siemens fail--safe devices via the hardware catalog
S Integrating third--party fail--safe devices by importing the corresponding generic
station description files.
This configuration is loaded into the PLC, the PLC evaluates this data and makes
the information required for PROFIsafe communication with an F--device, available
to the NCK and PLC--side Safety system SW for further evaluation of the F device
configuration.
In addition, the NCK machine data for PROFIsafe parameterization is transferred
from the NCK to PLC. Both components evaluate this machine data and compare
the F devices, which are parameterized in this data, with the F--device configura-
tion provided from the PLC.
The information on configuring and parameterizing the PROFIsafe I/O provided in
this chapter essentially refers to the specific requirements of SIMATIC. Complete
information on configuring and parameterizing PROFIsafe components from Sie-
mens is provided in the SIMATIC Manuals:
References:
S ET 200S Distributed I/O System, Operating Instructions
(http://support.automation.siemens.com/WW/view/de/1144348)
S ET 200S Distributed I/O System Fail Safe Modules, Installation and Operation
Manual
(http://support.automation.siemens.com/WW/view/de/27235629)
S ET 200pro Distributed I/O System, Fail--Safe Modules, Operating Instructions
(http://support.automation.siemens.com/WW/view/de/22098524)
S Distributed I/O system ET 200eco, Fail--Safe I/O Modules, Operating Instruc-
tions
(http://support.automation.siemens.com/WW/view/de/19033850)
S ET 200M Distributed I/O System Fail Safe Modules, Signal Modules Installation
and Operation Manual
(http://support.automation.siemens.com/WW/view/de/19026151)
S SIMATIC ET 200SP Distributed I/O System ET 200SP System Manual
(http://support.automation.siemens.com/WW/view/de/58649293)
S SIMATIC ET 200SP Distributed I/O System ET 200SP Equipment Manual
(http://support.automation.siemens.com/WW/view/de/90157130)
S SIMATIC Safety -- Configuring and Programming, Programming and Operating
Manual
(http://support.automation.siemens.com/WW/view/de/54110126)
7-208
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
© Siemens AG 2015 All Rights Reserved
10/15