Data Description; Machine Data For Sinumerik 840D Sl; Overview Of The Machine Data - Siemens Sinumerik 840D sl Function Manual

Data Description

8.1

Machine data for SINUMERIK 840D sl

8.1.1

Overview of the machine data

The checksum data have the following meanings:
Axis--specific checksums
CRC Functionality
AX[0] Monitoring functionality
AX[1] SINAMICS HW dependent data
AX[2] SINAMICS coupling
NCK checksums
CRC Functionality
NCK[0] Safe communication; SPL I/O
connection; SPL functionality
NCK[1] User SPL configuration
NCK[2] Enable I/O connection
NCK[3] PROFIsafe--CRC1
---- means: This data is not calculated into any checksum.
© Siemens AG 2015 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
Change results in an alarm
27032 "Axis %1 checksumme error safe monitoring.
Confirmation and acceptance test are required!"
27035 "Axis %1 new HW component, acknowledgment and
function test required"
27060 "Axis %1 checksum error of drive assignment.
Confirmation and acceptance test required"
Change results in an alarm
27070 "Checksum error, SPL parameter assignment, and
SPL interfaces. Confirmation and acceptance test are
required!"
27071 "Checksum error, safe SPL parameterization.
Confirmation and acceptance test are required"
27072 "Checksum error, enabling safe communication.
Confirmation and acceptance test required"
27073 "Checksum error, S7 PROFIsafe configuration.
Confirmation and acceptance test required.
8
8-347