Siemens Sinumerik 840D sl Function Manual page 552

Sinumerik safety integrated

Hide thumbs Also See for Sinumerik 840D sl:

Table of Contents

Commissioning

9.1 Pictures of the user interface and softkeys

The most important information about the active functions is displayed in the

"Overview" window:

S Axis/drive

All NC axes and drives in the system are displayed.

S Extended functions

This column displays whether and if yes, which extended functions are used for

this axis or this drive.

S Basic functions

This column displays as to whether a basic function is used for this axis or for

this drive and its associated control.

S Assignment

NC axis or internal Control Unit of the drive – or a drive object exists on the

Control Unit, to which an NC axis is assigned.

S Setting SI commissioning

Indicates whether the commissioning mode is active for the drive.

S Status symbols

The parameters are evaluated through two channels. The status symbols

indicate as to whether the parameters are identical in both channels.

Green: Parameterization in the 1st and 2nd monitoring channels identical

Red: Parameterization in the 1st and 2nd monitoring channel different

You can supplement or switch over the display in the "Overview" window:

S Using the "Safe drives" softkey, you can toggle between the displays of

"All drives" and "Safe drives".

S Using the "Confirm SI HW" softkey, you can confirm that hardware components

have been replaced after safety commissioning has been completed.

S You can change to the detailed view using the "Details" softkey.

SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition

Sinamics s120