Siemens Sinumerik 840D sl Function Manual page 731

10/15
27302
Parameter
Explanation
Response
Remedy
Program r
continuation
27303
Parameter
Explanation
© Siemens AG 2015 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
F_DP: Double assignment MD %1[%2] - - MD %3[%4]
%1 = MD name 1
%2 = MD field index for MD name 1
%3 = MD name 2
%4 = MD field index for MD name 2
A double assignment has been illegally parameterized in the specified
machine data.
SPL inputs ($A_INSE) are assigned a multiple number of times by the
F_DP communication. MD involved:
-- MD13346 $MN_SAFE_RDP_ASSIGN:
F net data of an F_SENDDP are assigned a multiple number of times
by sub--slots MD involved:
-- MD13337 $MN_SAFE_SDP_FILTER:
Logical basis addresses are assigned a multiple number of times by
various SPL connections MD involved:
-- MD13334 $MN_SAFE_SDP_LADDR, MD13344
$MN_SAFE_RDP_LADDR:
Connection numbers are assigned a multiple number of times by
various SPL connections MD involved:
-- MD13333 $MN_SAFE_SDP_CONNECTION_NR, MD13343
$MN_SAFE_RDP_CONNECTION_NR:
Parameter DP_DP_ID is assigned a multiple number of times by
various SPL connections MD involved:
-- MD13331 $MN_SAFE_SDP_ID, MD13341 $MN_SAFE_RDP_ID:
Alarm display
NC start disable in this channel
Interface signals are set
Mode group not ready
Channel not ready
NC stop for alarm
Correct the specified MD
Switch--off – switch--on the control
F_DP: Number of signals in MD %1[%2] < > MD %3[%4]
%1 = MD name 1
%2 = MD field index for MD name 1
%3 = MD name 2
%4 = MD field index for MD name 2
In machine data MD13336/13346 $MN_SAFE_SDP/RDP_ASSIGN,
MD13337/13347 $MN_SAFE_SDP/RDP_FILTER
a different number of F net data signals was parameterized.
10.2NCK safety alarms for Sinumerik 840D sl
Diagnostics
10-731