10/15
Starting the trace
The trace is called in the operating area "Diagnostics"
"Trace".
Figure 10-36 Starting the servo trace
The variables can be selected using the "Insert variable" softkey. When inserting a
variable, the associated axis for the measurement is selected, [1] means axis X1.
The variable is transferred into the list and the list completed with "OK".
© Siemens AG 2015 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
Diagnostics
10.1 Troubleshooting procedure
Menu advance key
10-625