Install The Device; Rack Mounting The Router - Cisco 8011-2X2XP4L Hardware Installation Manual

Install the Device

Before you begin this task, ensure that you have read and understood the safety warnings.
Note
Installing the the Cisco router involves the following tasks:
•
•
•
•
•
•
•
•
•
•

Rack Mounting the Router

You can choose to either set up the router on a rack or wall mount it.
We recommend that you use the below racks while mounting the router.
The installation instructions of the Cisco 8010 Series Routers are similar, and any differences between the
router variants are specifically called out.
The illustrations are for reference purpose only, the actual router may vary based on your variant of Cisco
8010 Series Routers.
Rack Mounting the Router, on page 27
Ground the Device, on page 38
Install the AC Power Cables, on page 40
Install the DC Power Cables, on page 41
Port Connection Guidelines , on page 43
Connect to the Console Port , on page 43
Connect to the Management Ethernet Port, on page 44
Install and Remove Transceiver Module, on page 45
Connect Interface Ports, on page 51
Maintain Transceivers and Optical Cables, on page 51
Hardware Installation Guide for Cisco 8011-2X2XP4L PLE Service Endpoint Router
4
C H A P T E R
27