Replacing The Temperature Control Board; Figure 5-55. Temperature Control Box Internal Component Replacements - Thermo Scientific Omni FTIR Multi Gas CEMS Instruction Manual

Preventive Maintenance and Servicing
Temperature Control Box Components
Replacing the
Temperature Control
5-66 Omni FTIR Multi Gas CEMS Instruction Manual
Figure 5–55. Temperature Control Box Internal Component Replacements
3. To install the new fuse, line up the 2 pins on the fuse with the 2 mating
holes in the connector and push the fuse in all the way until flush. Note
that there is no polarity on the fuses.
4. Re-install the temperature control box cover per the above procedure
"Removing and Installing the
Use the following procedure to replace the temperature control board
inside of the temperature control box.
Board
Equipment Required:
Phillips screwdriver
Small Phillips screwdriver
Temperature Control Board
Cover".
Thermo Fisher Scientific