Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
Recall Configurations
The Recall Configurations function, which permits recalling active configurations
from the controller, is accessed either by selecting Recall from the Exit Menu
System screen, by selecting Recall Configurations from the Operator Express
menu, or by selecting Recall from the System Start-up menu.
Selecting this function from either the Exit Menu System screen or from the
Operator Express menu causes the following screen to display:
Recall Configurations Menu Buttons
Button
Home
Back
1. Press either the Up or Down triangle to select the desired configuration
number.
Note: Enter the desired configuration on the numeric keypad.
2. Press Enter.
A Recall ... Adjusting Image Density prompt displays, and the system returns
to the Operator Express menu.
Rev: 1
Figure 3-12. Recall Printer Configurations.
Function
Press Home to return the system to the Exit Menu System
screen.
Press Back to return the system to the Main menu.
Page 3-19
of 32 pages
Chapter 3: Printer Operation
April, 2014
Advertisement
Table of Contents
