Dc2+Dg File Information Acquisition - SATO CL4NX Programming Reference Manual

17.22
Common Commands
for All Languages
17.22

DC2+DG File Information Acquisition

File Information Acquisition
Command DC2
HEX code <12>
16
Default Value None
When turning off the power switch
Valid range
Valid range and
term of Printer operation in progress
command
Error
[Function]
This command returns the specified file data information.
[Format]
[DC2]DG,aa,b,cccccc,ddddddd
[Parameters]
Symbol Parameter name
Language
a
File type
b
c File name size (byte)
File name
*1 Only the file name is
specified
d
[Return data format (normal, data exists)]
[STX]a...a,b...b[ETX]
Symbol Parameter name
Total number of data byte
*This is the total number of bytes after parameter b.
a
The delimiting comma between parameters a and b, and
the ETX are not included.
d File data
[Return data format (normal, no data)]
[STX]0[ETX]
[Return data format (when a command error occurs)]
[NAK]<15>
16
DG Parameter
<44> <47> ,aa,b,cccccc,ddddddd
16 16
The command cannot be received during the printer
operation. ([NAK] return)
Commands can be received even if an error is occurring.
Valid range
SB: SBPL settings
SZ: SZPL settings
SI: SIPL settings
SD: SDPL settings
ST: STCL settings
0: Font/logo
1: True Type font
1 to 255
Data including the following character
groups
Alphabet
Numeral
Hyphen ("-")
Underscore ("_")
Period (".")
478
DC2+DG
Acquisition method
Two characters fixed
acquisition
One character fixed
acquisition
Acquired up to ","
Acquired up to the
file name size
Valid range
Data size from the first identifier
until before [ETX]