Dc2+Db Initialization - SATO CL4NX Programming Reference Manual

17.17
Common Commands
for All Languages
17.17

DC2+DB Initialization

Initialization
Command DC2
HEX code <12>
16
Default Value None
When turning off the power switch
Valid range
Valid range and
Printer operation in progress
term of
command
Error
[Function]
This command initializes the printer setting.
[Format]
[DC2] DB,aa
[Parameters]
Symbol Parameter Valid range
name
Identifier
CA: Common settings initialization
CB: Warning function initialization
II: IEEE1284 settings initialization
IR: RS-232C settings initialization
IL: LAN settings initialization
IU: USB settings initialization
IW: WLAN settings initialization
IB: Bluetooth settings initialization
IE: EXT settings initialization
IF: RFID settings initialization
SB: SBPL settings initialization
SZ: SZPL settings initialization
SI: SIPL settings initialization
SD: SDPL settings initialization
ST: STCL settings initialization
SA: AEP settings initialization
CX: Registration information
a
DB
<44> <42>
16 16
initialization
470
DC2+DB
Parameter
,aa
The command cannot be received during the printer
operation. ([NAK] return)
The command cannot be received while an error is
occurring. ([NAK] return)
Initialization target
[PRINTER] section
[COUNT] section
[IEEE1284] section
[RS-232C] section
[LAN] section
[USB] section
[WLAN] section
[BLUETOOTH] section
[EXT] section
[RFID] section
[SBPL] section
[SZPL] section
[SIPL] section
[SDPL] section
[STCL] section
[AEP] section
SBPL, Donw font
SZPL,
SIPL,
TrueType
SDPL,
STCL,
Log Image
Hex Dump
Error
Key
Date
Head
Buffer
SBPL BMP
Overlay
Format
PCX
Graphic
External
character
TrueType
BJD
Acquisition
method
Two characters
fixed acquisition