Installing A Plug And Play Printer Driver (For Usb Only) - SATO Argox I4 Series User Manual

3 Printer operation
3.7.1 Installing a Plug and Play printer driver
(for USB only)
Note:
We strongly recommend that you use the Seagull Driver Wizard
instead of the Microsoft Windows Add Printer Wizard when
installing and updating your Drivers by Seagull.
(Even though the "Add Printer Wizard" is from Microsoft, it too
easily performs a number of tasks incorrectly when updating
existing drivers. It also badly handles the situation where a printer
driver is already in use by a Windows application.)
1. Turn off the printer. Plug the power cable into the power socket on the wall, and
then connect the other end of the cable to printer's power socket. Connect the USB
cable to the USB port on the printer and on the PC.
2. Turn on the printer. If the printer supports Plug-and-Play, and you have successfully
connected it using a USB cable, then the Windows Add Hardware Wizard will
automatically detect the printer and display a dialog that allows you to install a
driver. Click Cancel and do not install the driver using this wizard.
59
Driver installation