Save Configuration Settings To A File - Digi TransPort WR31 User Manual

Device administration

Save configuration settings to a file

Once you have configured the router, save your chosen settings to non-volatile memory to avoid
losing them when the power is removed.
Save current configuration to Config n
Sets the configuration file to which the current configuration will be saved when the Save
button is clicked. There are two options: profile 0 and profile 1. The configuration profile in use
when the router powers up is indicated in the selection box. The default power-up profile is
profile 0.
Save All button
The Save All button saves the router's entire configuration. This operation
Saves the current configuration parameters to the file config.da0 or config.da1. The default
•
power up profile is profile 0. *.da0=profile 0, *.da1=profile 1.
Saves the ciphered versions of the passwords to the file pwds.da0 or pwds.da1 file**.
•
Saves the firewall configuration to the file fw.txt.
•
Saves the serial port configuration to profile 0 of the sregs.dat.
•
Saves the PAD parameters on all the PADs to profile 0 of the file x3prof.
•
Related CLI commands
Parameter Options
config save
saveall n/a
Digi TransPort WR Routers User Guide
Equivalent web parameter
Save current configuration to Config n
Save all configuration
Save configuration settings to a file
842