Panasonic FP-E Programming Manual page 223

FP2/FP2SH/FP10SH
Specifying periodical interrupt programs (when S1 = H3 or S1=H5) for FP0/FP2/FP2SH/FP10SH only
4
Specify the setting with decimal number.
The time interval = value of S2 × 0.5 (ms).
. .
Bit position
15 12 11
S2
Time interval setting: K1 to K3000 (0.5ms to 1.5s)
INT24 disabled: K0
Note
For the difference in the operation of H3 and H5, refer to
"Example 2 for setting periodical interrupt".
(H5 can be specified with the PLC FP2/FP2SH Ver. 1.50 or later.)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
. . . . . .
8 7 4 3 0
K0 to K3000
Basic Instructions
2 − 113