Panasonic FP-E Programming Manual page 229

FPΣ/FP−X/FP0R
SYS1
Outline This changes the communication conditions for the COM port or Tool
port based on the contents specified by the character constant.
Program example
Trigger
R0
10
DF
S
Operands
Relay
Operand Operand
WX WY WR WL
S N/A N/A N/A N/A
Explanation of example
When R0 turns on, the transmission format and baud rate for the COM. 1 port are set as follows.
Character bit: 8, Parity: Odd
Stop bit: 1
Baud rate: 19,200 bps
Description
The communication conditions for the port specified by No. 1 keyword are changed to the contents specified
by No. 2 keyword.
Contents that can be changed include the following:
1) Communication format
2) Baud rate
3) Unit No. For FP0R, indirect settings are available.
4) Header and Terminator
5) RS (Request to Send) control
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Communication conditions setting
Ladder Diagram Ladder Diagram
COM1, B8POS1
SYS1, M
SYS1, M
Character constant "M"
Timer/Counter Register
SV EV DT LD
N/A N/A N/A N/A N/A
Address
10
S
11
12
S
25
COM1,19200
No. 1 No. 2
keyword keyword
Index
Constant
register
FL I K
N/A N/A N/A
Basic Instructions
Availability
FPΣ/FP−X/FP0R
Boolean Non-ladder
Instruction
ST R
DF
SYS1
M
COM1, B8POS1
SYS1
M 19200
COM1,
Index
modifier modifier
H M
A N/A
A: Available
N/A: Not Available
2 − 119
0