Services; Dhcp Server Functionality; Configuring The Dhcp Server - AudioCodes Mediant 4000 SBC User Manual

Session border controllers
Hide thumbs Also See for Mediant 4000 SBC:
Table of Contents

Advertisement

CHAPTER 16    Services
16

Services

This section describes configuration for various supported services.

DHCP Server Functionality

The device can serve as a Dynamic Host Configuration Protocol (DHCP) server that assigns and
manages IP addresses from a user-defined address pool for DHCP clients. The DHCP server can
also be configured to supply additional information to the requesting client such as the IP address of
the TFTP server, DNS server, NTP server, and default router (gateway). The DHCP server
functionality complies with IETF RFC 2131 and RFC 2132.
The DHCP server can service up to 10,000 DHCP clients. The DHCP clients are typically IP
phones that are connected to the device's LAN port.
The DHCP server is activated when you configure a valid entry in the DHCP Servers table (see
Configuring the DHCP
Interfaces table. When an IP phone on the LAN requests an IP address, the DHCP server allocates
one from the address pool. In scenarios of duplicated IP addresses on the LAN (i.e., an
unauthorized network device using one of the IP addresses of the DHCP address pool), the DHCP
server detects this condition using an Address Resolution Protocol (ARP) request and temporarily
blacklists the duplicated address.
You can also configure the DHCP server to respond only to DHCPDiscover requests from DHCP
clients that contain a specific value for Option 60 (Vendor Class Identification). For more
information, see

Configuring the DHCP Server

The DHCP Servers table lets you configure the device's DHCP server (only one). The DHCP
Server table configures the DHCP server implementation. This includes configuring the DHCP IP
address pool from where IP addresses are allocated to requesting DHCP clients, as well as
configuring other information such as IP addresses of the DNS server, NTP server, default router
(gateway), and SIP proxy server. The DHCP server sends the information in DHCP Options. The
table below lists the DHCP Options that the DHCP server sends to the DHCP client and which are
configurable in the DHCP Servers table.
Table 16-1: Configurable DHCP Options in DHCP Servers Table
DHCP Option Code
Option 53
Option 54
Option 51
Option 1
Option 3
Option 6
Option 44
Option 46
Server) and associate it with an active IP network interface listed in the IP
Configuring the Vendor Class
Identifier.
DHCP Option Name
DHCP Message Type
DHCP Server Identifier
IP Address Lease Time
Subnet Mask
Router
Domain Name Server
NetBIOS Name Server
NetBIOS Node Type
- 184 -
Mediant 4000 SBC | User's Manual

Advertisement

Table of Contents
loading

Table of Contents