Viewing Network Status; Viewing Active Ip Interfaces; Viewing Ethernet Device Status; Viewing Ethernet Port Information - AudioCodes Mediant 4000 SBC User Manual

CHAPTER 49 Viewing Network Status
49

Viewing Network Status

This section describes how to view network-related status.

Viewing Active IP Interfaces

You can view the device's active IP interfaces that are configured in the IP Interfaces table (see
Configuring IP Network
➢
To view active IP network interfaces:
■ Open the IP Interface Status page (Monitor menu > Monitor tab > Network Status folder >
IP Interface Status).

Viewing Ethernet Device Status

You can view the status of configured Ethernet Devices that have been successfully applied. To
configure Ethernet Devices, see
➢
To view Ethernet Device status:
■ Open the Ethernet Device Status page (Monitor menu > Monitor tab > Network Status folder
> Ethernet Device Status).

Viewing Ethernet Port Information

You can view status information of the device's Ethernet ports. To configure Ethernet ports, see
Configuring Underlying Ethernet Devices.
If the device is operating in High-Availability mode, you can also view Ethernet port
information of the redundant device, by opening the Redundant Ethernet Port
Information page (Monitor menu > Monitor tab > Network Status folder > Redundant
Ethernet Port Information).
➢
To view Ethernet port information:
■ Open the Ethernet Port Information table, by doing one of the following:
● Navigation tree: Monitor menu > Monitor tab > Network Status folder > Ethernet Port
Information.
● Monitor home page: Click an Ethernet port on the graphical display of the device (see
Viewing Device Status on Monitor
Interfaces).
Configuring Underlying Ethernet
Page).
- 753 -
Mediant 4000 SBC | User's Manual
Devices.